corrosion resistant pumps

FYBROC_LOGO_BRAND_2016_r1.jpg

Fybroc® is the world leader in the design and manufacture of fiberglass reinforced pumps. These pumps are available in different materials to provide excellent corrosion resistance for tough applications including pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids.

1500 series Horizontal ANSI Pumps

· Capacities to 5000 GPM (1140 m3/hr)

· Heads to 400 feet (125 m)

· Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2

· Working pressures to 200 PSI (1,379 kPa)

· Fiberglass reinforced plastic (FRP) construction

· VR-1, VR-1A, BPO-DMA and EY-2 materials

· ASME/ANSI B73.1 conformance

· High strength casings with 150lb. FF flanges

 

Fybroc_Series_1500.jpg
 

Horizontal Close Coupled Pumps

Capacities to 1500 GPM (345 m3/hr)

Heads to 400 feet (125 m)

Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2

Working pressures to 200 PSI (1,379 kPa)

Fiberglass reinforced plastic (FRP) construction

VR-1, VR1A, BPO-DMA and EY-2 materials

Back pull-out design

Continuous strand fiberglass construction

 

Fybroc_Series_1530.jpg
 

Magnetic Drive Pumps

Capacities to 1,500 GPM (350 m3/hr)

Heads to 400 feet (125 m)

Working temperatures to 180°F (82°C) for VR-1, 275°F (135°C) for EY-2

Working pressures to 200 PSI (1,379 kPa)

Fiberglass reinforced plastic (FRP) construction

VR-1, VR-1A, BPO-DMA and EY-2 materials

Silicon carbide shaft, sleeve bearing and thrust bearings

Also Available in a Self-Priming Version

Fybroc_Series_2530.jpg
 

Self-Priming Pumps

Capacities to 1400 GPM (320 m3/hr)

Heads to 300 feet (95 m)

Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2

Working pressures to 175 PSI (1,207 kPa)

Fiberglass reinforced plastic (FRP) construction

VR-1, BPO-DMA and EY-2 materials

Replaceable volute extension

FRP baseplates available

High strength casing with integral 150 lb FF flanges

ISO/DIN/JIS flange configuration available

Fybroc_Series_1630.jpg
 

Recessed Impeller  Pumps

Capacities to 2400 GPM (545 m3/hr)

Heads to 130 feet (40 m)

Working temperatures to 212°F (100°C)

Working pressures to 175 PSI (1,207 kPa)

Fiberglass reinforced plastic (FRP) construction

VR-1, VR-1A, BPO-DMA, EY-2 materials

High strength casings with integral 150 lb. FF flanges

Tangential discharge connection

Back pull-out design

Power frame interchangeable with 1500/1600 series

FRP baseplates available

fybroc-Series_3000_Pump.jpg
 

Vertical & Cantilever Sump Pumps

·  Capacities to 5000 GPM (1140m3/hr)

·  Fiberglass Reinforced Plastic (FRP) construction

·  Heads to 275 feet (85 m)

·  Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2

·  Working pressures to 175 PSI (1,207 kPa)

·  Lengths (settings) from 18 inches (457 mm) to 30 feet (9.1 m) with optional tailpipes

·  Split bearing design for east of maintenance

·  Shafts available in 316SS, Alloy 20, Titanium, Hastelloy or higher alloys

 

 

Fybroc_Series_5500.jpg