INDUSTRIAL & COMMERCIAL END SUCTION PUMPS

american-marsh.png

General purpose end suction pumps are used in commercial, industrial and municipal applications every day. The RE series end suction products feature back pull out impellers, centerline discharges, casted integral feet on all casings with heavy casing thickness, impellers with back pump out vanes and oversized shafts to provide the end user with a superior, reliable product.

Capacities to: 9,000 GPM (2,044 m^3/hr)

Heads to: 450 Feet (140 m)

Temperatures to: 300 F (150 C)

Speed ranges: 900 to 3600 RPM

ebara-logo-featured.jpg

The TH Series end suction centrifugal pumps are available in either close-coupled or frame mounted configurations. With optional materials, the TH Series line extends the hydraulic coverage across 70 different sizes with heads to 710 ft and flows to 3,000 GPMThe TH series are ideally suited for a wide variety of applications, including heating, air conditioning, pressure boosting, cooling water transfer, and water supply.

Discharge Size: 1 to 6 inch

Range of HP:
– to 60 HP, close coupled
– to 300 HP, frame mounted

Capacity: to 3,000 GPM

Head: to 710 Ft.

Liquid: clean water

Fybroc_Logo%20(LARGE).png

The corrosion resistant Series 1530 pumps provide the space and weight savings of a close coupled pump combined with the ruggedness of a standard Series 1500 pump. Sixteen sizes are available. The fiberglass components are manufactured utilizing the Resin Transfer Molding technique which enables complete control of the fiberglass reinforcement in high stress areas. Metallic pump components are NOT in contact with process fluids.

Capacities to 5000 GPM (1140 m3/hr)

Heads to 400 feet (125 m)

Working Temperatures to 250°F (121°C)

Working Pressures to 200 PSI (1,379 kPa)

Dean_Brand.png

The Series FW1200 Water Pump is the highest quality and most cost effective vertical or horizontal configured pumping equipment designed specifically for commercial and/or recreational water applications. Two sizes are available in ductile iron construction (bronze impeller).

Capacities to 3200 GPM (727 m3/hr)

Premium quality construction materials – Ductile iron, steel, and 316SS construction and bronze impeller

 Heads to 155 feet (47 m)

 Pumping temperatures to 250°F (121°C)

 Certified to NSF/ANSI Standard 50